Master Equipment Everyday Pro Mini Tub 32In Clay

Our premium Master Equipment™ Everyday Pro Mini
Tub is designed specifically for grooming smaller
pets. Perfect for your dog washing station.

• Basin is made of 18-gauge zinc-plated, powder-coated
  steel, with a rust-resistant stainless steel bottom
  panel
• Backsplash is 21-gauge steel
• Seams are sealed with mold-resistant silicone to provide
  a long-lasting, watertight seal
• The mold-resistant silicone caulking provides a
  long-lasting, watertight seal

Each tub features three 1″ diameter plumbing holes (fit for
4″ or 8″ faucet hookups), predrilled 3¼” drain hole, and
two u-shaped backsplash bolts. Shampoo rack included.

This product meets or exceeds Professional Pet Groomers and
Stylists Alliance (PPGSA) standards.

Please be sure to review your State or Municipal
plumbing & electrical guidelines before
purchasing.

Materials: Basin is made of 18-gauge
zinc-plated, powder-coated stainless steel Backsplash is
21-gauge stainless steel
Size: 32″L x 26″W x 50½”H

Parts List:
A) Rear Stand (1)
B) Top Stand (1)
C) Stand Sides (2)
D) Tub Basin (1)
E) Tub Backsplash (1)
F) Tub Side Splashes (2)
G) Shampoo Rack (1)
H) Hex Bolts (8)
I) Standard Bolts (34)
J) Nuts (34)
K) Silicone Glue Sealant and Gun (1)

Tools needed: Hex Wrench Philips Head
Screwdriver Pliers

1. Bolt one side stand (C) to rear stand (A) with two hex
   bolts (G); repeat for other side of stand.
2. Bolt the top of the stand (B) to assembled sides with two
   hex bolts (G); repeat for the other side.
3. Lower the tub basin (D) onto the assembled stand. Note:
   The tub can be positioned so the drain hole is on the left or
   right.
4. Choose what side of the basin you want the backsplash (E)
   to be on.
5. Lay a thin line of silicone sealant (K) along the bottom
   edge of one side splash (C) and side of tub basin (D). Bolt
   the bottom of one side splash (C) to the tub basin (D). Use a
   standard bolt (1) and nut (J) in every pre-drilled hole.
6. Lay a thin of silicone sealant (K) along the front sides
   and the bottom edge of the backsplash (E). Bolt the
   backsplash (E) to the attached side splash (F) and to the tub
   basin (D). Use a standard bolt (K) and nut (L) in every
   pre-drilled hole.
7. Lay a thin line of silicone sealant (K) along the bottom
   edge of the other side splash (F) and the side of tub basin
   (D). Bolt the side splash (F) to the tub basin (D) with
   remaining standard bolts (!) and nuts (J), using one in every
   hole.
8. The tub basin comes pre-sealed with silicone. For extra
   leak protection, add another layer of silicone along the
   seams of the basin prior to use.
9. Remove excess silicone from all seams, making sure the
   silicone has completely filled the gaps.
10. Hang the shampoo rack (G) onto the back of the backsplash
    using hooks on the back rack.
11. Adjust leveling feet on the stand to have the drain
    approximately ⅛” lower than the opposite side of the tub.
    This allows water to drain water.
12. Install plumbing as needed. Faucet holes are 4″ and 8″ on
    center, and the tub takes 3¼” standard sink strainer.

Download Specifications
(PDF File)
Download Assembly
Instructions (PDF File)

Shipping Info: This item is not eligible for
free or discounted shipping. This item qualifies for Free
Shipping with the purchase of $2000 or more of select Master
Equipment & ProSelect Equipment.